Product ID:FOAM, 01714
MSDS Date:02/02/1995
FSC:8030
NIIN:00N073339
MSDS Number: CCNNQ

C&R PRODUCTS

1000 E DEL AMO BLVD
CARSON CITY, CA 90746
US

Emergency Phone: 800-424-9300(CHEMTREC)

Info Phone: 310-537-2800

Cage: CRPRD

C&R PRODUCTS

CARSON, CA 90746 US

Telephone: 213-537-2800

Cage: CRPRD

ISOCYANIC ACID, METHYLENEDI-P-PHENYLENE ESTER;

CAS: 101-68-8

RTECS: NQ9350000

Fraction By Weight: 30-60%

OSHA PEL C 0.02 PPM

ACGIH TLV: 0.005 PPM

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

POLYMETHYLENEPOLYPHENYLENE ISOCYANATE; (POLYMERIC MDI)

CAS: 9016-87-9

RTECS: TR0350000

Fraction By Weight: 30-60%

OSHA PEL N/K

ACGIH TLV: N/K

POLYETHER; (POLYETHER POLY BLEND)

Fraction By Weight: 15-40%

OSHA PEL N/K

ACGIH TLV: N/K

METHANE, CHLORODIFLUORO-; (CHLORODIFLUOROMETHANE) (SARA

CAS: 75-45-6

RTECS: PA6390000

Fraction By Weight: 15-40%

OSHA PEL 1000 PPM

ACGIH TLV: 1000 PPM

LD50 LC50 Mixture:SEE INGREDIENT 1
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CAUTION! CONTENTS UNDER PRESSURE.
IRRITANCY OF PROD:IRRITATING TO EYES, SKIN AND RESPIRATORY TRACT.
SENSITIZING PROPERTIES:MAY CAUSE SENSITIZATION BY SKIN CONTACT AND
INHALATION. SYMPTOMS MAY INCLUDE: COUGHING, WHEEZING AND SHORTNESS
OF BREATH. CHLOROFLUOROCARBON MATLS HAVE PRDCED SENSIT OF
MYOCARDIUM (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZS:TO EPINEPHRINE IN LAB ANIMALS & COULD
HAVE A SIMILAR EFFECT IN HUMANS. ADRENOMIMETICS (I.E., EPINEPHRINE)
MAY BE CONTRA-INDICATED EXCEPT FOR LIFE-SUSTAINING USES IN HUMANS
ACUTELY OR CHRONIC ALLY EXPOSED TO CFCS .
Medical Cond Aggravated by Exposure:EXPOSURE TO INDIVIDUALS WITH
ASTHMA, ECZEMA AND OR ALLERGIES MAY AGGRAVATE EXISTING CONDITIONS.

First Aid:EYES:FLUSH WITH CLEAN, LOW PRESSURE WATER FOR AT LEAST 15
MINUTES WHILE HOLDING EYELIDS OPEN. SKIN:REMOVE CONTAMINATED
CLOTHING; WASH SKIN WITH SOAP AND WATER. INHALATION:REMOVE TO FRESH
AIR. INGESTIO N:IN CASE OF EXCESSIVE INGESTION, GIVE LARGE AMOUNTS
OF LIQUIDS. DO NOT INDUCE VOMITING. IN ALL CASES SEEK ADDITIONAL
MEDICAL ATTENTION.

Flash Point:>200F,>93C
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM, WATER.
Fire Fighting Procedures:WEAR NIOSH APPROVED PRESSURE DEMAND SCBA &
FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:THERMAL DECOMPOSITION PRODUCTS MAY
INCLUDE FLUORIDES, CHLORIDES AND PHOSGENE .

Spill Release Procedures:PROVIDE ADEQUATE VENTILATION. WEAR SUITABLE
PERSONAL PROTECTIVE CLOTHING AND EQUIPMENT. SCRAPE UP THE BULK OF
THE SPILL AND PUT INTO A SUITABLE WASTE RECEPTACLE. AVOID SPREADING
THE SPILL TO OTHER SUR FACES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:PROTECT CONTAINERS FROM PHYSICAL
ABUSE. AVOID DIRECT SUNLIGHT. STORAGE TEMPERATURE:32F-120F
(OC-49C). DO NOT INCINERATE AEROSOL CAN.
Other Precautions:NO SMOKING IN AREA OF USE. DO NOT USE IN GENERAL
VICINITY OF ARC WELDING, OPEN FLAMES OR HOT SURFACES. HEAT AND/OR
UV RADIATION MAY CAUSE THE FORMATION OF CHLORIDES, FLUORIDES OR
PHOSGENE .

Respiratory Protection:USE ONLY IN WELL-VENTILATED AREAS. WITH
INSUFFICIENT VENTILATION, WEAR NIOSH APPROVED SELF CONTAINED
BREATHING APPARATUS.
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:ANSI APPROVED EMERGENCY EYE WASH AND DELUGE
SHOWER . WEAR PROTECTIVE CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
HAZ DECOMP PRODS:CHLORIDES, FLUORIDES AND PHOSGENE .

Vapor Pres:4000
Spec Gravity:1.3
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.

Stability Indicator/Materials to Avoid:YES
AVOID WATER CONTAMINATION, OPEN FLAMES, ALCOHOLS, STRONG BASES, ACIDS
AND AMMONIA.
Stability Condition to Avoid:REACTION MAY BE VIOLENT AT ELEVATED
TEMPERATURES.
Hazardous Decomposition Products:DURING COMBUST, CARBON MONOXIDE &
DIOXIDE, NITROGEN OXIDES, AMMONIA & TRACES OF HYDROGEN CYANIDE ARE
GIVEN OFF. (SUPDAT)

Waste Disposal Methods:DISP MUST BE I/A/W FED, STATE & LOC REGS . DO
NOT PUNCTURE/INCIN. RELIEVE ALL PRESS PRIOR TO DISP. EMPTY CYLS,
ONCE RELIEVED OF ALL PRESS, CAN BE DISP AS NON-HAZ WASTE. DISP OF
LEFTOVER CHEM BY FOLLOWING INSTRUCTIONS UNDER SPILL PROCESS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.